Wireless Trainer System

Free from Trainer Cord

Easier and More Relieved

Free from Cord, Easier for Trainer

Different from the traditional trainer cord, the wireless trainer system requires no cable connection between the trainer and the trainee transmitter, which is easier and more relaxing for both. Free from cable limitations, the trainer can move whenever necessary, especially it also ensures good remote control even trainer is 600 meters(1969ft) away from the trainee.

Note: the wireless trainer cable only supports 10 channels of PPM signals. Please set up the "CH-SELECT: 12CH" to "CH-SELECT: 10CH" in the SYSTEM menu if both your instructor transmitter and student transmitter are AT10II and AT9S Pro; AT10, AT9S, and AT9.

Free from Cord, More Relieved for Trainee

The wireless trainer system effectively avoids the unintentional pull, which may cause the cord to drop. Training becomes safer and more relaxed.

Even the RC beginners can enjoy the fun of acro flight with the trainer mode on.

Wireless Trainer Cable Working Mode

Traditional Trainer Cable Working Mode

Anti-interference Communication Technology

Radiolink AT9S&AT10II with the technology of DSSS&FHSS hybrid dual spread spectrum and T8FB with the same FHSS as AT9S, not only significantly increase the control distance and improve the anti-interference ability, but also achieve software expansion and excellent compatibility. Software expansion ensures multiplayer competing at the same time and excellent compatibility greatly reduces mutual interference. Even the trainee receiver stays close to the trainer transmitter, the anti-interference ability can be ensured.

The communication technology is the key point to make RadioLink wireless trainer function come true.

3ms Quick Response

RadioLink transmitters take only 3ms for all the channels to respond synchronously.

Signals are stable and responsive without any delay, even have been transmitted twice by both trainee and trainer transmitters, ensuring a better RC experience.

High Efficiency but Low Consumption

With the switch power supply module integrated, the RadioLink wireless trainer system ensures a stable voltage output of 5V, and the receiver won’t easily get damaged by high voltage. Meanwhile, the power supply of the trainer transmitter can provide power to the wireless trainer system at the same time with highly efficiently managing power management.

Innovative Dual Mode Trainer Function

Traditional Hold Mode

Traditionally, the trainer switch (SWH) needs to be kept pushing to allow the model to be controlled by the trainee, which is tiring. Once the switch is loosened, the model will be controlled by the trainer.

Brand New ALT Mode

But for the innovative dual-mode trainer function, the switch only needs to be toggled once.

That is, the model will be controlled by the trainer and trainee in turn each time the switch is toggled.

Wireless Trainer Cable Package List